|
|
|
|
|
|
perfo cost comparison
|
|
|
|
The table below
shows a cost comparison between Perfo, concrete
and tarmac hard standings. Costs are approximate
and include the cost of ground preparation,
equipment hire, materials and labour, where
required. The costs for the concrete and tarmac
alternatives were prepared by an independent
paving expert and are intended as an approximate
guide. Figures are based on UK costs, including
17.5% VAT
|
System |
Area |
Cost per m² |
Total Cost |
PERFO* |
30 m² |
£17.63 |
£529 |
100 m² |
£16.45 |
£1,645 |
CONCRETE** |
30 m² |
£45.75 |
£1,375 |
100 m² |
£35.25 |
£3,525 |
TARMAC*** |
30 m² |
£56.75 |
£1,700 |
100 m² |
£45.50 |
£4,550 |
* includes cost for 1 day hire of a compacting plate
for 30m² or a vibrating roller for 100 m². No
professional labour required. Ground excavation not
normally required. Cost per m² is reduced for areas
greater than 100m².
** based on costs for 150 mm layer
of concrete on a sub-base and equipment hire as
required
*** based on 150 mm sub-base, 70
mm base course and 25 mm wearing course and use of
professional labour and equipment as required.
Source: S2T Aviation & Perfo-UK /
Concrete & Tarmac
http://www.pavingexpert.com |
We would be pleased to supply a
specific quotation for your particular requirement.
Perfo main page |
|